uPVC Windows
Profile Specification

Windows Plus Online manufactures all uPVC casement windows from Profile 22 optima range.

uPVC

Profile 22 optima is a high-grade profile that is a fully-integrated full 70mm system, available in both chamfered and sculptured variations and is used nationally all over the UK, this is for standard and flush casements.

A chamfered frame is a more traditional look and is the design used when uPVC windows were first developed. Sculptured uPVC windows were added around 2005 as a more modern look when the extrusion process evolved.

The profile 22 optima system meets all requirements for thermal efficiency as standard, and a wealth of intelligent design features have been added in the development of the profile. 6 thermal chambers as Windows Plus Online uses RCM as standard this increases the chambers 8 chambers which is market leading thermal efficiency and structural rigidity. There is also strategic local wall thickening used to increase the two external faces durability, and within the extruded components for better hardware retention and screw grip where required.

Additional Links

Below you will find the technical documentation which relates to the uPVC profile.

Gaskets

With Profile 22, optima gaskets are co-extruded as part of the extrusion process, meaning there is never shrinkage, in turn improving the longevity of the casement window in heat efficiency and weather tightness.

The PCE ‘D’ gasket has been tried and tested for giving a direct sightline which is a unique feature throughout the window range.

When opting for the flush casement windows, Windows Plus Online uses a unique quad seal combination, consisting of two standard gaskets which are complimented with a soft wall pile in the centre of the window, and external medium wool pile with an integrated fin which seals to the rubber gasket on the outer edge of the flush casement vent.

Additional Links

Below you will find the technical documentation which relates to the uPVC gaskets.

Ancillaries

Profile 22 optima has an extensive range of frame packers (sometime referred to as knock-ons or add-ons), giving you confidence, every configuration can be addressed. Bridging packers for the glass units are provided free of charge with all items manufactured at Windows Plus Online to make sure the glass has a free flow of air to the unit.

Additional Links

Below you will find the technical documentation which relates to the uPVC ancillaries.

Internal Bead

All windows and doors from the profile 22 optima range are manufactured as standard to be internal glazed, adding security and ease of fitting. In addition to this the window have been security passed and are ready for proposed enhancements to PAS 24.

Additional Links

Below you will find the technical documentation which relates to the uPVC profile.

Building Regulations and Certification

Profile 22 optima meets all requirements not only for UK and European building regulations, under instruction profile 22 optima can be manufactured to conform to Document Q approval, PAS 24 approved, Secured by Design solutions. All items are British Standards group approved, under ISO 9001 / ISO14001 / OHSAS18001, profile 22’s commitment to responsible sourcing BES6001 licence produces all this, put together reflects the commitment to quality and increases the supply chain’s open and honest approach.

For more information, please see the building regulations page.