Budget Composite Single Door Designer

Are you sure you want to reset everything?

Windows Plus Online know it can be difficult when ordering products online. If you need any help or have any questions, please don't hesitate to contact us.

Please note this will take you away from the product designer.

Mechanical/Technical

This is the overall height of the aperture in millimeters, measured brick to brick externally. We recommend to deduct 10mm to allow for brick tolerance.

We recommend you take the measurements at 3 points on the frame and use the smallest of the measurements. In your measurements, please include any profile knocks ons you require.

For more information, please see our survey guide.

Mechanical/Technical

This is the overall width of the aperture in millimeters, measured brick to brick externally. We recommend to deduct 10mm to allow for brick tolerance.

We recommend you take the measurements at 3 points on the frame and use the smallest of the measurements. In your measurements, please include any profile knocks ons you require.

For more information, please see our survey guide.

Mechanical/Technical

This is the overall width of the door section in millimetres. As this is a multiple frame the door width is measured from outside of door frame to outside of door frame.

In your measurements please include any frame extenders or joining strips you require.

For more information, please see our survey guide.

Mechanical/Technical

This is the overall width of the side panels combined in millimetres. As these are multiple frames each side panel width is measured from outside of frame to outside of frame. In your measurements please include any frame extenders or joining strips you require.

Mechanical/Technical

This is the overall height of the door in millimetres, measured from the top of the bottom brick of the aperture to the top of the composite door. In your measurements please include any cills, or frame extenders you require.

For more information, please see our survey guide.

Mechanical/Technical

This is the overall height of the top light to go above your composite door in millimetres, measured from the bottom of the brick at the top of the aperture to the centre of the top of the door frame. In your measurements, please include any frame extenders or joining strips you require.

Mechanical/Technical

This is the overall width of the side panel on the left of your door viewed externally in millimetres. Each side panel width is measured from outside of frame to outside of frame. In your measurements please include any frame extenders or joining strips you require.

Mechanical/Technical

This is the overall width of the side panel on the right of your door viewed externally in millimetres. Each side panel width is measured from outside of frame to outside of frame. In your measurements please include any frame extenders or joining strips you require.

Cosmetic

This will put a midrail in the side panels of your door combination.

Mechanical/Technical

The width of the midrails will determined by the choice of door design you have chosen. Windows Plus Online will decide of the best option for this when manufacturing.

For more information, please see our survey guide.

Cosmetic

This is the position of the midrail opted for in the door sections of the composite door.

Mechanical/Technical

If you do not select a custom midrail height this is supplied automatically at 850mm, or the nearest to line through with a letterbox in your door slab, or you can select the height you desire. This height is measured from the bottom of the frame to the centre of the midrail.

Please note this does not include any cill or frame extenders requested.

For more information, please see our survey guide.

Mechanical/Technical

This is the side of your door you wish to have the hinges. This is viewed from outside.

For more information, please see our technical hardware specification.

Mechanical/Technical

This determines if you wish for your door to open into your property or outwards.

Cosmetic

This is the section at the bottom of the frame which you step over.

Mechanical/Technical

A full frame threshold will have an upstand of 70mm. A low uPVC threshold will have an up stand of 60mm. A disabled threshold is an aluminium threshold which is set for easy access via disabled wheel chair and can be installed onto a cill. An MD25 threshold is a disabled threshold required for part M approved installations. This cannot be installed onto a cill.

If a colour (gold or chrome) is not stated in the notes of the product, we will choose the colour we feel is more in keeping with the selected door.

Mechanical/Technical

The cill is the material that the frame sits on and projects externally, if required. The height of the cill is 25mm, the different depth options will distinguish the overhang from the frame, which will be 70mm shorter than the size stated as this is the width of the frame.

Mechanical/Technical

These are extensions of profile, clipped onto the external frame. Trade often refer to these as knock-ons or add-ons.

These will be required should there be a difference between internal and external measurements due to plaster lines etc.

Cosmetic

This is the colour of the door slab on the exterior of your property.

Mechanical/Technical

The external slab colours are all GRP skins which are sprayed and then baked. All finishes are grained.

Cosmetic

This is the colour of the door slab on the interior of your property.

Mechanical/Technical

The internal slab colours are all GRP skins which are sprayed and then baked. All finishes are grained.

Cosmetic

This is the colour of the profile of the uPVC frame on the exterior of your property.

Cosmetic

This is the colour of the profile of the uPVC frame on the interior of your property.

Cosmetic

Certain slab designs allow for a letterplate to be positioned in multiple locations.

Cosmetic

The colour of your knocker will be the same as your handle colour.

Mechanical/Technical

If a knocker is not showing as an option this is due to the panel design you have chosen. You can also choose to have a spyhole or a knocker with a spyhole.

Cosmetic

This changes the appearance of the barrel on the inside of the property.

Mechanical/Technical

The keyhole on the internal of the property is replaced with a knob which you turn to lock the door from inside.

Mechanical/Technical

The security chain adds an extra layer of security to your door. When the chain is attached, it allows for a short open distance when answering the door.

Cosmetic

Your numerals will be supplied separately to be installed. They will be the same colour as the selected handle colour.

Cosmetic

The paint is used to touch up any small accidental knocks or scraps that may occur. The pats are exactly colour matched to your door.

Mechanical/Technical

These are usually required on new build installations. They are metal brackets which are longer than the window and you can screw into the frame and the inner brick course or wood.

Cosmetic

This option is to select the pattern and privacy that you require for your glass.

Mechanical/Technical

The number by the side of the glass option shows the privacy rating with 5 being the highest privacy.

For more information, please see the technical glass specification.

Mechanical/Technical

Your glass type represents how strong your glass is. Annealed is the common name for float glass and tempered glass is the common name for toughened glass.

Toughened safety glass is required in certain areas. Please see the building regulation information page if unsure whether to use toughened glass or float glass.

Laminated glass is two pieces of annealed glass which is stuck together with a film. Laminated glass is classed as a safety glass usually used for extra security such as shop fronts and part Q building regulation requirements.

For more information, please see the technical safety glass information.

Mechanical/Technical

The rating of your glass represents how energy efficient your glass is.

A Rated is the best glass for energy rating, while none rated is the lowest but also the cheapest.

The acoustic value represents how much sound the glass can dampen; the higher the acoustic value the more sound it can dampen. High acoustic glass is ideal for areas where there is going to be a lot of external noise.

The makeup of the units will change in line with your choice here.

For more information, please see the technical clear glass information.

Cosmetic

The colour of the spacer bar will be shown between the glass units.

Mechanical/Technical

Insulated glass sealed units (IGUs), also known as double glazed units, are constructed with two panes of glass that are kept apart by a spacer bar (or pane spacer) that sits around the inside edge of the glass.